Showing 1–36 of 54 results

001131C

  • Marca Italiana SEE
  • 100 cm in length
  • Ceramic nozzle 01.5 mm

316 series

  • 316 series
  • 1 1/2” 180 Liters

4-Way Var Command

  • Pressure: 35 BAR
  • Caudal: 150 L/MIN

5062410C

  • Marca Italiana SEE
  • Courage. Hibrida Plus
  • Lock safety
  • Ceramic nozzle 01.5 mm

Air induction Twin flat spray nozzle

  • The inclination of the jets improves penetration into the vegetation. Nozzle with air aspiration (Venturi system): sprays thick drops loaded with air bubbles, which do not drift. They burst into fine droplets upon contact with plants.
  • It almost completely suppresses drift while increasing the number of impacts (excellent coverage with treated areas).
  • Anti-jamming design and double air intake hole.
  • Compact format (28mm length) adapted to all ramps and nozzle holders.
  • Recommended height of use: 50/60 cm.
  • Recommended pressure: 3 bar

America

  • Individual Protective Clothing for chemical risks
  • Costal kit for 2 pieces
  • Made with yellow rubberized Talan Model AMERICA – Standard

Anti-drip Intermediate nozzle holder

1/2″, 3/8″ anti-drip nozzle holder

APS 121

  • Italian 3-membrane pump in NBR (Desmopan® and Viton on order)
  • Parts in contact with liquid: anodized aluminum
  • As standard: pressure accumulator and safety valve
  • On request: power take-off (PTO) protection

APS 145

  • Italian 4-membrane pump in NBR (Desmopan® and Viton on order)
  • Parts in contact with liquid: anodized aluminum
  • As standard: pressure accumulator and safety valve
  • On request: power take-off (PTO) protection

AR1203

Italian semi-hydraulic pump with three diaphragms. Parts in contact with pumped liquids in aluminum and AISI 303/304. NBR membranes. NBR seals. Screws with galvanic zinc treatment. Plug to empty the liquid from the circuit before wintering. Complete with overpressure valve with reset, air chamber and gimbal protection hood.

AR1604

Italian semi-hydraulic four-membrane pump, for use in the professional agricultural sector in spraying machines for treatments in orchards or vineyards with high-pressure phytosanitary products. Parts in contact with pumped liquids in aluminum and AISI 303/304. NBR membranes.

AR30

Italian semi-hydraulic two-membrane pump, for use in semi-professional agricultural sectors.

Articulated Double nozzle holder 1/4″

Double 1/4″M high pressure articulated nozzle holder.

AVI-OC Air injected off center nozzle

  • Air injection nozzle (Venturi system): spraying large droplets loaded with air bubbles which do not drift and burst into small droplets upon contact with the plants.
  • It eliminates almost all drift, however increasing the number of impacts (excellent coverage in the treated areas).
  • Improves treatment quality when at the top of the ramp.
  • Optimizes the quality of the treatment when it is at the end of the ramp + 20cm.
  • Recommended pressure: 3 bar

Bagum

  • Individual Protective Clothing for chemical risks
  • Costal kit for 4, 5 and up to 6 pieces
  • Made with water-repellent cotton and with PVC reinforcement BAGUM Model – Standard

Berries 2000

  • 2000 Lt polyethylene tank.
  • BHA 200 Annovi Reverberi membrane bomb.
  • 2 high flotation agricultural tires.

Chavimochic

  • Individual Protective Clothing for chemical risks
  • Costal kit for 3 and up to 4 pieces
  • Made with beige water-repellent cotton and with PVC reinforcement CHAVIMOCHIC 2 Model – Standard

Discs & Cores

  • The characteristics of ALBUZ® ceramic allow working with strong pressures while maintaining precision and results.
  • Hollow conical jet made up of fine droplets.
  • It is possible to choose your application angle by choosing the corresponding Disc (AD) & Core (AC) coupling

Drift reduction flat spray nozzle

  • Nozzle operational from 2 bar.
  • Flow rate corresponding to the ISO color code.
  • 50% reduction in the number of fine droplets (<100μm).
  • Detachable calibration pad.
  • Recommended height of use: 50/60 cm.
  • Recommended pressure: 2 bar

F20004-F20013

  • Marca Italiana SEE
  • 60 / 90 cm in length
  • Ceramic nozzle 01.5 mm

F20007

  • Marca Italiana SEE
  • With turbo head

Forza 2000

  • The Forza 2000 Traction Fogger is equipment for the phytosanitary application of fruit trees. It has a centrifugal ventilation system that allows fine droplets to be directed and the product to penetrate to the trunk of the tree.

Forza 3000

  • The Forza 3000 Traction Fogger is equipment for the phytosanitary application of fruit trees.
  • It has a centrifugal ventilation system that allows fine droplets to be directed and the product to penetrate to the trunk of the tree.

Full cone nozzle

  • The flow rate of this nozzle corresponds to the international ISO color code.
  • Use 100 mesh nozzle filters for models 80 015 – 80 02.
  • Possibility of mounting on a ramp (distance between 35 cm and 50 cm)
  • Recommended ramp pressure: 3 bar.
  • Recommended pressure arboriculture / viticulture: 10 bar.

Hollow cone nozzle

  • The flow rate of this nozzle corresponds to the international ISO color code.
  • Quick disassembly for easy cleaning.
  • The 80 degree angle can be associated with TVI 80° nozzles to optimize applications.
  • Possibility of mounting on ramps from 3 bar.
  • Perfect coupling with the turbulence chamber and flow pressure obtained thanks to the polishing of the ceramic parts.
  • Recommended pressure: 10 bar.

Hollow cone nozzle

  • Quick disassembly for easy cleaning.
  • Approval from the BBA (German body).
  • Possibility of mounting on ramps from 3 bar.
  • Perfect coupling with the turbulence chamber and flow pressure obtained thanks to the polishing of the ceramic parts.
  • Recommended pressure: 10 bar.