Drift reduction flat spray nozzle
- Nozzle operational from 2 bar.
- Flow rate corresponding to the ISO color code.
- 50% reduction in the number of fine droplets (<100μm).
- Detachable calibration pad.
- Recommended height of use: 50/60 cm.
- Recommended pressure: 2 bar
Related products
MVI Air induction Wide Angle Flat spray nozzle
- Air injection nozzle (venturi system): spraying large droplets loaded with air bubbles which do not drift and burst into small droplets upon contact with the plants.
- It almost completely eliminates drift, however increasing the number of impacts (excellent coverage of the treated area).
- Very easy disassembly for internal cleaning.
- Recommended pressure: 1.5 bar.
AVI-OC Air injected off center nozzle
- Air injection nozzle (Venturi system): spraying large droplets loaded with air bubbles which do not drift and burst into small droplets upon contact with the plants.
- It eliminates almost all drift, however increasing the number of impacts (excellent coverage in the treated areas).
- Improves treatment quality when at the top of the ramp.
- Optimizes the quality of the treatment when it is at the end of the ramp + 20cm.
- Recommended pressure: 3 bar
Air induction Twin flat spray nozzle
- The inclination of the jets improves penetration into the vegetation. Nozzle with air aspiration (Venturi system): sprays thick drops loaded with air bubbles, which do not drift. They burst into fine droplets upon contact with plants.
- It almost completely suppresses drift while increasing the number of impacts (excellent coverage with treated areas).
- Anti-jamming design and double air intake hole.
- Compact format (28mm length) adapted to all ramps and nozzle holders.
- Recommended height of use: 50/60 cm.
- Recommended pressure: 3 bar