Showing 13–24 of 54 results

APS 145

  • Italian 4-membrane pump in NBR (Desmopan® and Viton on order)
  • Parts in contact with liquid: anodized aluminum
  • As standard: pressure accumulator and safety valve
  • On request: power take-off (PTO) protection

AR1203

Italian semi-hydraulic pump with three diaphragms. Parts in contact with pumped liquids in aluminum and AISI 303/304. NBR membranes. NBR seals. Screws with galvanic zinc treatment. Plug to empty the liquid from the circuit before wintering. Complete with overpressure valve with reset, air chamber and gimbal protection hood.

AR1604

Italian semi-hydraulic four-membrane pump, for use in the professional agricultural sector in spraying machines for treatments in orchards or vineyards with high-pressure phytosanitary products. Parts in contact with pumped liquids in aluminum and AISI 303/304. NBR membranes.

AR30

Italian semi-hydraulic two-membrane pump, for use in semi-professional agricultural sectors.

Articulated Double nozzle holder 1/4″

Double 1/4″M high pressure articulated nozzle holder.

AVI-OC Air injected off center nozzle

  • Air injection nozzle (Venturi system): spraying large droplets loaded with air bubbles which do not drift and burst into small droplets upon contact with the plants.
  • It eliminates almost all drift, however increasing the number of impacts (excellent coverage in the treated areas).
  • Improves treatment quality when at the top of the ramp.
  • Optimizes the quality of the treatment when it is at the end of the ramp + 20cm.
  • Recommended pressure: 3 bar

Bagum

  • Individual Protective Clothing for chemical risks
  • Costal kit for 4, 5 and up to 6 pieces
  • Made with water-repellent cotton and with PVC reinforcement BAGUM Model – Standard

Berries 2000

  • 2000 Lt polyethylene tank.
  • BHA 200 Annovi Reverberi membrane bomb.
  • 2 high flotation agricultural tires.

Chavimochic

  • Individual Protective Clothing for chemical risks
  • Costal kit for 3 and up to 4 pieces
  • Made with beige water-repellent cotton and with PVC reinforcement CHAVIMOCHIC 2 Model – Standard

Discs & Cores

  • The characteristics of ALBUZ® ceramic allow working with strong pressures while maintaining precision and results.
  • Hollow conical jet made up of fine droplets.
  • It is possible to choose your application angle by choosing the corresponding Disc (AD) & Core (AC) coupling